Nanoflex PF High Base

Nanoflex PF High Base

Category:

Nanoflex PF High Base

It is a phthalate free plastisol based printing base used to achieve an elastic and so touching effect in textile printing. It can be used as a transparent or can be coloured with pigments.

Description

Advantages
• Nanoflex PF High Base has elastic structure and high water strenght.
• It is phthalate free. However, it is not suitable to ecological standards because it contains PVC.
• It provides to elastic and soft-handfeel high density effect.

Applications
Nanoflex PF High Base is used to make or three dimension sharp line printings.
• Before use, please stir this product well. Do not use any additives that are not advised.
• After using, the screen should be cleaned with the synthetic thinner.
• Its curing time is at 320°F / 160°C; 1,5 mins.

Specification

Fabric Types
100 % Cotton

Packaging
10/ 20 / 25 Kg.

Mesh No.
24-43 mm

Squeege
60-80 V Type

Curing Time
160⁰C/1,5min

Cleaning
with Synthetic Thinner

Health & Safety
MSDS available on request

Viscocity
[(77 °F/25°C) sp: 7, rpm: 2 Brookıeld ] : 1.900.000 – 2.000.000 [mPa.s]

Density
1,05 g/cm3 (77 °F/25°C)

Additives
Nanoflex PF pigments

Ek bilgi

Marka

Fabric Type

Printing Type

Component

Ürün Tipi